• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable possession from theft. This system is discrete and doesn't require additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This then authorizes the startup of your vehicle.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rise in vehicle theft. There are many different types of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking device can help you locate your vehicle if it's stolen, but it will not prevent the crime. Immobilisers, on the other hand does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves to steal your car.

By using the buttons that are already present in your car, the ghost vehicle immobiliser device creates an unique sequence that must be entered before the engine can start. This can be done using the indicator stalk, window or heater buttons. Additionally it is possible to use a mobile app which can function as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is especially useful if you need to hand your car over for valet parking or servicing since the immobiliser is active and not deactivated.

The Ghost is a truly unique and innovative device that works in conjunction with the buttons in your vehicle rather than being a standalone unit. This means that it's not just a highly effective protection against theft of your vehicle, but can also be transferred to any future vehicles you have, making it more valuable than a traditional steering wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is a high-tech security system that safeguards your pride & joy from key cloning and hacking. It also blocks ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be plugged into the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It is also indestructible to jamming devices, which is a common technique used by car thieves to circumvent existing immobilisers.

The advantage of CAN data over conventional systems is that they operate silently. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create a a unique disarming sequence. This sequence can be extended by 20 presses to provide additional security. The iPhone app lets you make one, authorized connection using the pairing code unique to the Bmw M4 Ghost Installer and communication between the two is encrypted.

The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run if a valid PIN code has been entered. It is possible to operate temporarily in valet or service mode (with parameters set, such as 30mph speed limit), so you can give your car to an attendant or valet without entering a code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from starting normally until you enter a specific code. The system can be turned on or off by using your smartphone app without the need for additional wires.

Standard factory immobilisers in vehicles work by having an electronic transponder in the key that transmits an electronic signal to the ECU. If the correct code is transmitted, the car will start, but if a transponder is swapped with one from another vehicle the immobiliser cannot recognize it. This allows the vehicle be stolen and started. The ghost autowatch immobiliser immobiliser has been developed by a South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. The only way thieves could take your car is physically towing it away and even then, they wouldn't be able to drive it.

Ghost makes use of the buttons on your vehicle including the indicator stalk as well as the steering wheel and door panels to generate an individual PIN sequence that can be changed that must be entered prior to you are able to use your car. This is done without any extra hardware, such as a keyfob. It can take up to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that a system has been installed.

ghost 2 immobiliser fitting near me is more difficult to remove than car alarms that require disarming by pressing a series of buttons. This makes it a perfect complement to a GPS tracker that can assist in locating your car after it's been taken.

Override of emergency PIN code

You don't have to look long on social media sites to find stories or videos about cars that were stolen using the latest technology tools. This includes key-cloning and hacking devices that allow them to start your vehicle without your original key fobs.

Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being stolen in the event of being targeted by thieves. It works by creating a unique pin code push sequence from your existing buttons on the steering wheel, door panel, and the center console. The unique pin code must be entered in conjunction with your original key fob to prevent the vehicle from starting. The unique override pin can be found on the black card you will receive following installation. It is simple to remember as there are no LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software which can identify what type of security systems you have installed. This makes it a great alternative to the tracker.

Contrary to other security systems which use a relay in engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They also work with service/valet modes and an excellent alternative to a tracking device when you take your car to the dealer for an electrical problem.

Service/Valet mode

In recent years there has been an rise in the number of vehicles stolen without the owner's keys. With the ease of access to key cloning tools and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been cloned or your vehicle has been stolen.

It communicates directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent as it doesn't use radio frequency or key fobs. It isn't detected by diagnostics or any other hacking device. It also stops you from introducing an ECU or key to bypass the system as only the PIN code allows the engine to be started.

The device is hidden within your car and is reached via the buttons on your steering wheel, center console and door panels. A unique and changeable PIN code sequence of up to 20 digits needs to be entered before you can start your car.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car from being moved away or even started if a PIN code isn't entered first. If you're driving away with the device in motion it will display an indicator on your dashboard that will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN at this point, the indicator will keep flashing & will require another PIN code for every attempt to start your vehicle.